Travertine is a sort of stone flooring that is quarried from the earth and afterward refined down into tiles for structural use. It has been utilized in a variety of building applications for many years. A type of limestone, travertine is genuine “hard as a stone,” but it is also relatively permeable when contrasted with some other common stone development materials. Consequently, it has certain natural vulnerabilities that should be viewed as when cleaning and caring for these materials. This incorporates both long term, regular maintenance concerns, as well as specific instructions and precautionary measures you ought to follow at whatever point working with these surfaces.

How Often to Clean Travertine Flooring

Normal clearing or vacuuming, in addition to wiping, ought to be done week by week with travertine floors, or at whatever point the floor is clearly dirty. Disinfecting is a smart thought for monthly maintenance and cleaning grout lines is a smart thought at regular intervals, however, this interval can change contingent upon how messy your floor gets. Most stone ground surface producers prescribe surface-fixing travertine every three to five years, however harsh chemicals and heavy use may destroy the sealer more rapidly than that.

Here’s what you need:

Supplies

Broom or vacuum cleaner

Mop or sponge

Mop bucket

Mild, non-acidic dish soap

Towels

Baking soda

Small scrub brush

Penetrating stone sealer (where needed)

Surface stone sealer

Do not use abrasive chemical cleaners or anything acidic when maintaining travertine floors. Travertine stone is by nature an alkaline substance, and it can stain and discolor if it comes in contact with acidic substances.

How to Clean Travertine Flooring

Regular Cleaning

Sweep or vacuum the floor every week to remove small dirt and grit particles that can cause minor abrasive scarring to the surface of the tile. With time, these tiny particles can wear down the luster of the material while also removing the protective sealant coat, leaving the stone beneath vulnerable to discoloration and staining.

Mopping Travertine Flooring

The best method to wipe a travertine floor is to use warm, plain water, applied with a mop or sponge that is wrung dry so that the surface gets just barely damp. Do not concentrate travertine tiles with water, as it can penetrate down past sealant or into grout lines, causing discoloration, degradation, and the growth of mold and mildew.

Disinfecting Travertine Flooring

For disinfecting purposes, a tablespoon of mild, non-acidic dish soap can be added to a gallon of water and used to damp-mop these floors. However, when this is done, the surface should be mopped immediately with clean water to remove any hidden dirt that may exist.

Cleaning Grout Lines

The grout lines between tiles allow for the expansion and contraction of the material during seasonal temperature fluctuations, preventing individual pieces from rubbing into one another and cracking. However, it can also be the most prone point in your travertine flooring installation, as these gaps are susceptible to water penetration, stains, discoloration, and the growth of dark, unsightly, and unhealthy mold.

To clean travertine grout lines, mix equal parts baking soda and water to create a gritty paste. This can be scrubbed onto the grout with a small brush that will allow you to wash the areas between the tiles without scratching their edges and causing damage to the material

Sealing Travertine

One of the serious issues with normal travertine flooring is that the tiles have infinitesimal pores in the surface which can absorb fluids, leading to stains, staining, material debasement, and mold growth. The best approach to battle this is to ensure that the material is appropriately fixed both during and after installation and then again occasionally throughout its existence.

There are two sorts of sealants utilized on travertine floors. The first is a deep penetrating material that will infiltrate down and obstruct the pores, making it hard for dampness to attack the stone. At that point, a surface boundary sealer can be used to create a clear coating over the highest point of the tiles which will prevent recoloring substances from staining them.

When the underlying underneath surface sealer is brushed on, boundary surface coatings are then generally re-applied at regular intervals to maintain the protective qualities of this treatment.

Most stone manufacturers recommend an interval of three to five years for the optimal protection of the floor.

Travertine is an elegant, premium flooring material, and regular cleaning and sealing will keep it looking its best for decades.

For a professional Travertine cleaning, contact Texas Floor Restoration services today.

Leave a Reply

Your email address will not be published. Required fields are marked *